Removed Traktor X1, moved to Allen & Heath Xone:K2. Now considering adding the X1 back in, or changing the setup more in a software like way (including Ableton or start using the Remix Decks in Traktor or something). Oct 30, 2017 - Hi to all, First of all i have to say that i updated my OSX to High Sierra and seems that Taktor and Xone K2 are working ok till now. So, i have a.

For those who have been reading Traktor Tips for a while now, you’re likely to remember a mapping that was provided by one of our Friday Guest Mix DJ’s DJ Animine. Epson adjustment program l100 italian. Well Animine is back with a new and improved mapping for the Allen and Heath K2. This time it is set up to control 4 decks, but with the intention of using two K2’s together. So those lucky enough to own Xone K2’s this is for you! The first K2 is set up to control deck A and C, whilst the second is set up to control decks B and D. Check out what Animine has to say: Notes from Animine – Xone K2 mapping It’s been a while since I shared my for a single Allen & Heath Xone K2 controller.

In the meantime I have worked out a 4 deck mapping to be used with two A&H Xone K2 controllers. My setup consists of these 2 controllers, plus a Native Instruments, an A&H and a NI which is run in step sequencer mode. This setup allows me to run 4 decks simultaneously in Traktor and at the same time have Maschine act as a drum machine on one of the AUX channels on the Xone mixer. I won’t go into too much details of the setup, unless somebody wants a full description on how to setup and use it? ( use the comments below) Again it was my goal to keep the mapping simple, so no layers used in this mapping as with 2 controllers in use, you already have enough buttons to keep track of when you’re playing. What I’ve basically done is divide each controller into 2 halves, controller 1 ( left) is for decks A & C, whilst the other controller ( right) serves decks B & D.

Tip: connect the first controller via USB cable, but connect the second controller via the X:Link cable, it saves a USB port on your laptop. Each controller is divided into 2 sections by drawing a straight line down the middle, dividing the decks as described above.

The left controller is connected on MIDI channel 14 and the right controller on channel 15. If you want to check out the details of the TSI file, I would advise you to use either the, or use the ( Mac only). Both these tools allow you to view or edit the mapping file full screen mode instead of using the tiny Controller Editor window within Traktor.

For those who have been reading Traktor Tips for a while now, you’re likely to remember a mapping that was provided by one of our Friday Guest Mix DJ’s DJ Animine. Well Animine is back with a new and improved mapping for the Allen and Heath K2. This time it is set up to control 4 decks, but with the intention of using two K2’s together. So those lucky enough to own Xone K2’s this is for you! The first K2 is set up to control deck A and C, whilst the second is set up to control decks B and D.

Check out what Animine has to say: Notes from Animine – Xone K2 mapping It’s been a while since I shared my for a single Allen & Heath Xone K2 controller. In the meantime I have worked out a 4 deck mapping to be used with two A&H Xone K2 controllers. My setup consists of these 2 controllers, plus a Native Instruments, an A&H and a NI which is run in step sequencer mode. This setup allows me to run 4 decks simultaneously in Traktor and at the same time have Maschine act as a drum machine on one of the AUX channels on the Xone mixer.

I won’t go into too much details of the setup, unless somebody wants a full description on how to setup and use it? ( use the comments below) Again it was my goal to keep the mapping simple, so no layers used in this mapping as with 2 controllers in use, you already have enough buttons to keep track of when you’re playing. What I’ve basically done is divide each controller into 2 halves, controller 1 ( left) is for decks A & C, whilst the other controller ( right) serves decks B & D.

Tip: connect the first controller via USB cable, but connect the second controller via the X:Link cable, it saves a USB port on your laptop. Soul jazz records future bass rarest. Each controller is divided into 2 sections by drawing a straight line down the middle, dividing the decks as described above. The left controller is connected on MIDI channel 14 and the right controller on channel 15. If you want to check out the details of the TSI file, I would advise you to use either the, or use the ( Mac only). Both these tools allow you to view or edit the mapping file full screen mode instead of using the tiny Controller Editor window within Traktor.