• DVR4/9-SecuraNet™ USER MANUAL SW242-4SN / SW242-9SN / SW243-4MB / SW243-9MB. • - Ensure the vents on the sides and back of the DVR are not covered - Do not use the DVR near heat sources such as heaters, stoves, fireplaces - If the DVR has been damaged do not attempt to repair it yourself - contact Swann Technical Support for assistance Maintenance For safety reasons, disconnect the power adapter before cleaning the DVR. • Contents Chapter 1: DVR Features. 1 Chapter 2: DVR Layout. 2 2.1 Front Panel.

Calculate Code Dvr Online Calculate Code Dvr Online is a software selection with 4 downloads. The most lightweight of them are MetaTrader (sized at 475,658) and MathGV (sized at 987,954), while the largest one is Zen TDS with 55,699,014 bytes.

2 2.2 Rear Panel. 3 2.3 Remote Control. 4 Chapter 3: Hard Drive Installation. 5 3.1 Installing a Fixed SATA Hard Disk. 5 Chapter 4: DVR Connections.

• 8.1 Playback Control. 24 Chapter 9: USB Programming(optional).

25 9.1 Client Program Installation. 25 9.2 Program Interface. 25 9.3 Program Running. 26 Chapter 10: Specifications.

29 Chapter 11: Appendix. 30 11.1 System connection diagram. 30 11.2 Accessories.

DVR Features 4-Channel: 4 BNC Camera Inputs - 2 BNC Video Outputs 9-Channel: 9 BNC Camera Inputs - 1 BNC Video Output 4-Channel: 2 Audio Inputs - 2 Audio Outputs 9-Channel: 1 Audio input - 1 Audio Output View and Operate over Network (Broadband Connection Required) NTSC or PAL System Motion Detection with Sensitivity and Area Settings Timed Schedule, Alarm and Motion Triggered Recording Modes. • 2.1 Front Panel (All Models) 1. Power switch 2.

Removable HDD Tray 3. USB 2.0 Interface 5. Fast Forward 9.

DVR Layout 10. • 2.2 Rear Panel 1. Download wiro sableng format pdf lengkap pulomas. Audio Input(s) 2.

Video Output(s) 3. VGA Output (Optional) 8. Audio output 10. RS485 / Sensor Input / Alarm Output 16. • 2.3 Remote Control Channel Select 1-9 Number Display All Channels Menu Enter or Exit Menu ▲ Move Up / Left ▼ Move Down / Right Select / Modify Item Rewind Play Recording Fast Forward ● Record / Pause ■ Stop Recording / Playback Audio Audio Input / Output. Hard Drive Installation WARNING: Do not remove Hard Drive while DVR is running Ensure HDD jumpers are set to MASTER prior to inserting drive SW243-4MB / SW243-9MB has a hard drive pre-installed, please skip this step. 3.1 Installing a Fixed SATA Hard Disk 1 - Unlock and remove hard drive drawer from left side of the DVR 2 - Remove hard drive from drawer (if applicable) 3 - Align and connect power and SATA connectors to hard drive drawer.

DVR Connections. Starting the DVR 5.1 Firmware Version 5.2 Detecting Installed Hard Drive 5.3 Format Hard Drive After connecting the power adapter and turn on the power button, the system will boot-up and display the version and released date of the DVR’s current firmware. • 6.1 Navigating the Menus 6.2 Menu Overview Camera Setup Record Setup Record Frame rate Video Quality Record Schedule Sensor Setup Main Menu Hard Drive Setup Miscellaneous Setup Network Setup Video Backup 6. DVR Menu System [MENU]: enters Main Menu [▲, ▼, ◄ and ►]: move the cursor [SEL]: select/modify settings [MENU]: press again to exit or return to previous menu. • 6.3 Camera Setup Note: If a camera channel is set to off it will not record (Refer to 6.4 Record Setup) 6.4 Record Setup 6.5 Record Frame rate Press ▲, ▼, ◄ or ► button to select a channel, and then press [SEL] to increase the value or press [■STOP] to reduce the value. • 6.6 Video Quality 6.7 Record Schedule Setting the Record Schedule allows you to customize the type of recording depending on the time of day.

NO-RECORD [ white]: DVR will not record during this time. NORMAL-RECORD [ red]: DVR will record continuously. SENSOR-RECORD [S]: DVR will record when sensor or motion is triggered.

• 6.8 Sensor Setup CONT: Continuous alarm until any key is pressed. OFF: No alarm 6.9 H/W Sensor Setup Note: Sensors and extension alarms are not included with the DVR system and may be purchased separately. 6.10 Motion Detector Setup This section allows you to set up motion detection options for each camera. Sensor Record Time indicates how long the recording time is when the motion or sensor is triggered. • 6.11 Hard Drive Setup This section will display the current hard drive status and usage options HDD SIZE: indicates the total capacity of the hard drive installed in the DVR HDD USED: indicates the space used in the hard disk drive for recording and the percentage used HDD FORMAT: will erase all video and data on the installed hard drive and make it readable by the DVR. • 6.13 Miscellaneous Setup - Set Time 6.14 Miscellaneous Setup - Hidden Channel Enter the current password first, and then enter six characters as your new password, repeat the new password to confirm.